InfoTV installationsguide til Iiyama player

InfoTV installationsguide til Iiyama player


InfoTV IIYAMA player install guide The guide down below is for Iiyama LHxx54 


You are in the right spot if you want to create your Digital Signage player based on Android using the InfoTV software.


Keep in mind, though, that this process requires some basic IT skill.



  • Set language and select internet must be wired or wifi. Once connected, press the "back" button 




Get the registration code


Remote control Press → Home → 1668




Go to Settings and then press "System."

  • In here, press "Date and Time."

  • Enable "Use Network Time."

  • Scroll down to "Time Zone" and set the area to "Denmark" (or the country where your screen is located).



Insert the USB stick into the monitor.



Go back and then press "Storage". Find your InfoTV APK file from USB Drive


Install apk and select InfoTV apk from your USB drive (Allow all the permissions)




Follow the installation process and allow all needed permissions on the device. 

When asked if you want to install “Content Module” press “Install”. 

After installing the content module press “open”. 

A prompt will appear,  “Content Module” and allow it. -> Press “Back” on the TV remote. 

A new prompt has opened. Press “Install SignageOS”.

After installing the signageOS APP press “open”.

A new prompt will appear where you need to enable the signageOS accessibility service -> press “Settings”.

In the settings for “Accessibility” go down to the bottom, where you’ll find signageOS -> enable it.


Press back on the TV remote to get away from the settings. (Allow all the permissions)




If a prompt appears where it says “Unsupported device” > Press “CONTINUE ANYWAY”.


Press back on the TV remote to get away from the settings. 


If a prompt appears that tells you that a serial number is missing press “continue anyway”.



Then take Remote control and Press → Home → 1668


Go to Settings → Signage display → Source settings → Custom app → And select signageOS app



Take remote control and press home > Configuration 1 > Boot on source > custom app



After a restart, the Iiyama TV is set up correctly with InfoTV.